Returns to the product list PVC Compound 6. TPE Compound Injectiion-Molding (Foamed or Expand) Grade
(1) PRF
Related Products
1. Good limpness
2. It will get the even & refined foamed cell and no easy to become concave.
3. The foamed density can be about 0.7 and get a little foamed blowing mark.
The shoes will become better quality-feeling.
4. The injection process will not be produced dense smoke.
5. Not included heavy metals prescription and heavy metals content is less than 2PPM.
6. Good anti-cold weather, anti-vulcanization
Physical Properties:
Items | Test Results | Test Methods |
---|---|---|
Density | 1.10~1.18 | ASTM D792 |
Hardness | SHORE A 58~63 | ASTM D2240 |
Tensile Strength | 45~65 kgf / cm² | ASTM D638 |
Elongation | 350~450 % | ASTM D638 |
Tearing Strength | 16~30 kgf / cm² | ASTM D638 |
Anti-cold weather | 40000 times, no broken(-25℃) | ASTM D1052 |
Purpose: Working shoes’ middle soles , general shoes’ soles
Distributor